How To Slip A Marker In Knitting?

To slip a marker in knitting, first insert the right needle into the next stitch on your left needle. Then take the marker and place it on the right needle. Finally, slide the stitch off of the left needle and onto the right needle, thus slipping the marker between stitches.

Knowing how to slip a marker in knitting is an important skill for any knitter. It allows you to easily track where you are in the pattern, whether it be the number of stitches, rows, or rounds. In this article, we will cover the basics of slipping a marker in knitting and provide some helpful tips and tricks along the way.

Gather Supplies:

Before you can start slipping a marker into your knitting, you’ll need to gather the supplies you’ll need. You will need a marker of some sort, such as a safety pin, scrap yarn, or stitch marker. You may also want to have a pair of scissors handy.

Measure The Marker:

Once you have your supplies, it’s time to measure the marker. This is important because the marker needs to fit into your knitting without causing any disruption or damage. Measurements should be done carefully and accurately so that the marker fits snugly but not too tight.

Determine Placement:

Once the marker has been measured, it’s time to determine where it should be placed in the knitting. It’s important to make sure that it is placed correctly and securely so that it doesn’t slip out or cause any disruption in your knitting.

Prepare For Insertion:

Before inserting the marker into your knitting, it’s important to ensure that everything is prepared for insertion. This includes making sure that all stitches are pulled tight, and any loops or gaps are closed up before attempting to slip in the marker.

Push Through From Right Side:

Finally, when you’re ready to insert the marker into your knitting, make sure that you push it through from right side of the work. This will ensure that the placement is correct and secure, and also help prevent any disruption or damage when inserting it into your knitting.

Check Placement From Wrong Side:

When slipping a marker into your knitting, it’s important to check its placement from the wrong side of your work. This allows you to make sure that your marker is not twisted or off-center, which can affect the overall look of your finished project. When checking from the wrong side, look for signs of tension around the stitch that you are inserting the marker into. If there is too much tension, then it may be best to move onto another stitch instead.

Secure Ends Of Marker:

Once you have chosen a stitch to insert your marker into, it is important to secure both ends so that they do not come loose during knitting. For metal markers, this can be done by using pliers or threading a piece of embroidery floss through both ends and tying them off tightly. For plastic markers, you can use hot glue or threading a piece of yarn through them and knotting tightly at both ends.

Create Slip Knots:

Once both ends are secured, you will need to create two slip knots – one at each end – so that the marker does not move as you knit. To create slip knots for metal markers, simply wrap one end around itself several times before pulling tight and then doing the same on the other end. For plastic markers, threading yarn through both ends should suffice as long as it is tied off tightly enough so that it does not come loose during knitting.

Join Slip Knots With Knitting Stitches:

Now that you have created two slip knots on either side of your marker, it’s time to join them with two knitting stitches – one on either side – so that they stay securely in place while knitting. To do this, insert your needle into one side of the slip knot and then knit two stitches before repeating on the other side.

Check Final Position:

Finally, once both sides have been joined with two stitches each, check again from the wrong side of your work to make sure that all four stitches are correctly aligned and there isn’t any extra slack in either direction. Once everything looks good from this angle it’s time to continue knitting.

FAQ & Answers

What Kind Of Material Should I Use For My Markers?

Metal markers tend to last longer than plastic ones and have less chance of coming undone during knitting; however plastic markers are often easier to thread through tight spaces and come in more colors than metal ones do.

Is There Anything Else I Should Do When Slipping A Marker?

Yes. It’s always a good idea to check its placement from the wrong side before securing its ends so that everything looks neat and even when finished.


Knitting is a great way to make beautiful projects that you can wear or give as gifts. Whenever you need to slip a marker in your knitting, it’s important to be precise and careful. To do this, you can use a special locking stitch marker or simply thread a length of yarn through the stitches of the knitted piece. Once the marker is in place, make sure you don’t pull too hard on the yarn when you work with it as this could cause the markers to become loose or even unravel your knitting. With practice and patience, slipping markers into knitting can become second nature and help you create beautiful projects with ease.

Leave a Comment

Your email address will not be published. Required fields are marked *